Fault or Characteristics Frequencies

There are two types of Frequencies defined in VibCloud:

  • Bearing Fault Frequencies and

  • Gearbox Characteristics Frequencies

They can be accessed from the home screen by clicking “Fault Frequencies” from the “Administration” section.

Please note that module for defining Fault Frequencies has limited access only for users with Client Administrator role.

Creating new Bearing Fault Frequencies

  1. Open “Fault Frequencies” module, explained above in this document;

  2. Select “Bearing Fault Frequencies” tab

  3. Click on the “Create new Fault Frequencies” button on the right side of the screen and new modal window pops up outlining fault frequencies form;

  4. Fill form fields:

    1. Insert Code which will be used for searching specific fault frequencies;

    2. Fault Frequencies (FTF, BSF, BPFO, BPFI)

  5. Click on “Save Changes” button

Functionalities of Bearing Fault Frequencies

Each fault frequency can be:

  1. Searched by code;

  2. Functionalities in the list:

    1. Edit – Amend existing ones;

    2. Delete – Remove fault frequencies.

Creating new Gearbox Characteristics Frequencies

  1. Open “Fault Frequencies” module, explained above in this document;

  2. Select “Gearbox Fault Frequencies” tab

  3. Click on the “Create new Characteristic Frequencies” button on the right side of the screen and new modal window pops up outlining characteristics frequencies form;

  4. Insert Code which will be used for searching specific characteristic frequencies;

  5. Insert number of gears in the gearbox

  6. Click on “Create” button.

  7. Based on inserted number of gears, an empty table will appear with fields for inserting number of teeth per gear. All fields must be filled

  8. Click on “Calculate” button

  9. Based on inserted values for number of teeth per gear, application will calculate characteristic frequency and display them in table

  10. Click on “Save Changes” button

Functionalities of Gearbox Characteristic Frequencies

Each characteristic frequency can be:

  1. Search fault frequencies by code;

  2. Functionalities in the list:

    1. Edit – Amend existing ones;

    2. Delete – Remove characteristic frequencies.

 

Note: deleting fault frequencies will result in removing link with vibration parameters.

For usage of both types of fault frequencies, please check Analysis page - section Additional Analysis Features - Fault Frequencies.