...
“Current Password” is not inserted correctly
“New Password” and “Confirm New Password” are not identical
The new password doesn’t match the required format - it must contain one non-letter character, at least one digit ('0' - ‘9') and at least one uppercase (’A' - 'Z')
...
After the required data are inserted, click on “Change Password” to change it.
Profile application settings
There are several application settings that can be defined per user account:
...
Save last filter settings in the Review Data form - By selecting this option, application will remember the last filter settings in the Review Data form and apply it as a pre-defined filter.
Analyse Module - Single Spectra (Default Frequency Ranges) - The user can pre-define frequency ranges for each Parameter Type (Acceleration, Velocity, Demodulation). Each time user enters the Analysis module - Single Spectra and selects a parameter for analysis, if the frequency range is pre-defined, corresponding spectra will be displayed in that range.
Analyse Module - Default Parameter Types - The user can select which parameter types to be displayed each time when Measurement is selected for analysis. By default, all parameter types plus raw waveform will be displayed. If no parameter type is selected, only Acceleration will be displayed.
Analyse Module - Show Bearing Status - Bearing Status Parameter observes the ratio of the highest peak acceleration to the effective RMS acceleration value. It’s identification for the roller bearing diagnostic in accordance with DIN ISO 13373-3. It’s not recommended for machines powered by a gear unit or machines for which there is usually heavy background noise. By selecting this option, the Bearing status parameter value will be displayed in the trend chart, along with RMS values, and the Bearing status and value will be displayed next to the Acceleration RMS value above acceleration spectra in the analysis module.