Page Comparison

...

Analysis report – Structure based

1. Equipment List: List of available equipment in the database with at least one analysis record. Multiple selection is allowed in the dropdown menu;

2. Saved Reports: Drop down menu presenting previously saved settings;

...

3. Report Title: Please enter title for your report here;

4. Include Part 1: Part 1 is introduction - Why we have conducted the measurements and generated this report. Select this checkbox if you like report to include introduction section;

5. Clicking on the little arrow under part 1 will show text box where user can enter introduction text, usually executive summary;

...

6. Include Part 2: Part 2 includes Equipment Condition Summary Trend (List of conditions for the latest 6 analysed measured values per structure);

7. Include Part 3: Part 3 includes Condition and Recommendations (data from last analysis);

8. Include Part 4: Part 4 includes Overall Value Summary Table from measurements related with selected Measurements;

9. Display Alarms: As name suggest by ticking this checkbox alarms would be marked in the report;

10. Include Part 5: Part 5 includes selected spectras from related measurements;

11. Clicking on the little arrow under part 5 will show further options where user can select particular vibration parameter as well as report on only selected spectras. Spectra selection is done under analysis module;

...

12. Include Part 6: Part 6 includes Evidences from selected Measurements. Only images are displayed while documents are listed with their file names. Evidence list to be selected each time report is generated;

13. Clicking on the little arrow under part 6 will present interface where user can select which evidence they would like to include in the report. Same interface as in single report settings except here equipment where evidence belong is also listed in the table;

14. Include Part 7: Part 7 includes Legend of all colors and acronyms used in displayed data as well as Disclaimer;

15. Include Disclaimer: Please check this textbox is you need to include a disclaimer to the report;

16. Clicking on the little arrow under disclaimer section will show text box where user can enter disclaimer text;

Example report, all available content ticked (Extract only, not all pages shown).

Analysis report – Route based

1. Route List: List of routes with at least one condition analysis associated to the containing equipment;

2. Measurements: List of measurements per route;

3. Equipment List: List of equipment within the selected route with analysis for the selected measurements;

...

4. Saved Reports: Drop down menu presenting previously saved settings;

5. Report Title: Please enter title for your report here;

6. Include Part 1: Part 1 is introduction - Why we have conducted the measurements and generated this report. Select this checkbox if you like report to include introduction section;

7. Clicking on the little arrow under part 1 will show text box where user can enter introduction text, usually executive summary;

...

8. Include Part 2: Part 2 includes Equipment Condition Summary Trend (List of conditions for the latest 6 analysed measured values per structure);

9. Include Part 3: Part 3 includes Condition and Recommendations (data from last analysis);

10. Include Part 4: Part 4 includes Overall Value Summary Table from measurements related with selected Measurements;

11. Display Alarms: As name suggest by ticking this checkbox alarms would be marked in the report;

12. Include Part 5: Part 5 includes selected spectras from related measurements;

13. Clicking on the little arrow under part 5 will show further options where user can select particular vibration parameter as well as report on only selected spectras. Spectra selection is done under analysis module;

...

14. Include Part 6: Part 6 includes Evidences from selected Measurements. Only images are displayed while documents are listed with their file names. Evidence list to be selected each time report is generated;

15. Clicking on the little arrow under part 6 will present interface where user can select which evidence they would like to include in the report. Same interface as in single report settings except here equipment where evidence belong is also listed in the table;

16. Include Part 7: Part 7 includes Legend of all colors and acronyms used in displayed data as well as Disclaimer;

17. Include Disclaimer: Please check this textbox is you need to include a disclaimer to the report;

18. Clicking on the little arrow under disclaimer section will show text box where user can enter disclaimer text;